HP SureStore CD-ROM Server/Tower User's Guide - 5967-2149

3-12 Setup for IP Networks
Setting Up the Network Time Protocol
An alternative to manual configuration is automatic time syn-
chronization using the Network Time Protocol (NTP, as defined
by RFC 1769). Set these configuration parameters:
Or use NetWare NDS Time Synchronization
(see chapter 5)
.
Disabling Access
for Other
Protocols
For security, you can switch off all access to the server through
other protocols for which you do not set up access restrictions, by
setting configuration parameters in this table. Use the last item
in the table if you ever want to disable all web browser HTTP
access.
Server Password
You can change the following general server configuration
parameter:
Parameter Name Example Value Description
TimeSyncSource NTP
(a general server parameter)
to set Network Time Protocol
NTPServer 192.4.2.30
(an IP parameter) IP address or
Internet domain name of a server
to supply the network time.
Area Parameter Name Description
SMB EnableNetBEUI
Disables access to the CD-ROM server
using SMB over NetBIOS/NetBEUI.
SMB EnableNBT
Disables access to the CD-ROM server
using SMB over NetBIOS/TCP/IP.
NetWare NWEnable
Disables access to the CD-ROM server
using NetWare.
NFS NFSEnable
Disables access to the CD-ROM server
using NFS.
IP HTTPEnable
Disables web access to the CD-ROM
server using HTTP.
Parameter Name
Example
Value
Description
ServerPassword
fy98db
Default:
pass
The Supervisor, Administrator, or Root
password used for protocols HTTP,
NetWare bindery, SMB user level,
SNMP, and FTP. After the configuration
is written, the password appears as an
asterisk * for each character.