HP SureStore CD-ROM Server/Tower User's Guide - 5967-2149

Installing Your Tower 2-9
7. Plug in the power cord and the SCSI ribbon cable.
8. Perform all the steps in “Installing the Drive Module” section
on pages page 2-6 and page 2-7.
Troubleshooting
•
When plugging in the assembly, the CD-ROM hits one of the
other devices or the tower frame.
• The assembly is upside down.
• The CD-ROM drive above or below is upside down.
• One device does not have standard CD-ROM dimensions.
• The mounting hardware is upside down or attached to
the wrong holes.
•
The assembly does not slide in all the way.
• The assembly is upside down.
• The CD-ROM drive above or below is upside down.
• One device does not have standard CD-ROM dimensions.
• The mounting hardware is upside down or attached to
the wrong holes.
For other problems, see chapter 9, “Troubleshooting”.