HP SureStore CD-ROM Server/Tower User's Guide - 5967-2149

Setup Reference for All Networks 7-17
[NetWare] (NetWare IPX)
NWEnable yes
Enable or disable NetWare support.
Frame_802.2 auto Auto
allows automatic adaptation to that frame
type as found on the network. For networks with
multiple sections with different frame types,
server could adapt to frame type not compatible
with intended network section; use
Off
to dis-
able frame type used on other sections. Or edit
config.ini
file to use network number
xx-
xx-xx-xx
for intended network section. Web
page only allows changing to
auto
or
off
.
Frame_802.3 auto
Frame_EthernetII auto
Frame_SNAP auto
NetWareIP_Enable no
Enable or disable NetWare/IP.
NetWareIP_DSS_Server
Host name or IP address of DSS server (with
NetWareIP_Enable
set to
yes
).
ServerName HP
hhhhhh _NW
NetWare server name to be presented to the
NetWare clients, where
hhhhhh
are the last 6
digits of the LAN hardware (MAC) address.
InternalNetAddress
hh-hh-hh-hh
Internal network address assigned by a Net-
Ware file server. Default is the last 8 digits of the
hardware (MAC) address.
BurstMode on
Enable or disable burst mode.
BinderyEnable yes
Enables or disables bindery mode login. Set to
no
to increase system security for NDS. Super-
visor is always able to login in bindery mode
whether
no
or
yes
.
BindAuthentication
Name of NetWare server used for authentication
of user access to this server in bindery mode.
Parameter Name Default Value Description