HP NAS VA User's Guide

82
Known Problems
1. Dual homed systems: If you have a problem communicating with your arrays on a dual
homed system, including failure of the armdiscover command, there are several items that
should be investigated:
o Check to make sure the following file exists
/opt/sanmgr/hostagent/config/commIpAddr.txt
This file contains the IP address of the default or onboard NIC (LAN0). If the file
does not exist, you should create it.
o The netconf file can tell you the IP address of LAN0. It is found in the following
directory:
/etc/rc.donfig.d
o Settings in the following files in the /etc directory should also be checked:
hosts - Lists hostname of system with its associated IP address. The first host
entry needs to be the default (LAN0) setting.
resolv.conf - The first nameserver listed needs to be on the same network as
the default (LAN0).
HP NAS VA User's Guide (Print Version)