HP NAS VA User's Guide

Restarting the NAS Server

Restart the NAS server if you install a new version of the NAS web interface.

Note:

When restarting the NAS server, it is not required that you shutdown/restart the storage

array.

To restart the NAS server:

1. Using the NAS web interface, click the Configuration tab, then navigate down the

System Configuration tree to Shutdown/Restart.

2. Select Shutdown and Restart then click Apply. A dialog box informs you that:

o You and any other connected users will lose the connection to the device.

o The NAS web interface in the current browser cache becomes invalid. The browser

closes and you must re-connect to the system after it reboots.

3. Click OK. The HP NAS server restarts.