Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

380 Fabric OS Message Reference
53-1002149-01
FW-1438
45
Severity WARNING
FW-1438
Message <timestamp>, [FW-1438], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Missing SFPs: <Number of missing SFPs> missing out of
<Total number of SFPs> SFPs:config(<Percentage configured> percent,<Actual
threshold limit>). (Port(s) <port list>).
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
missing small form-factor pluggables (SFPs) is greater than or equal to the policy set by the
switchStatusPolicySet command.
Recommended
Action
Run the switchStatusPolicySet command to modify the SFP policy or to add SFPs to the empty
ports.
Severity WARNING
FW-1439
Message <timestamp>, [FW-1439], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Switch offline.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the switch is
offline.
Recommended
Action
Run the switchEnable command.
Severity WARNING
FW-1440
Message <timestamp>, [FW-1440], <sequence-number>,, INFO, <system-name>, <FRU label>
state has changed to <FRU state>.
Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to absent.
Recommended
Action
No action is required. Verify that the event was planned.
Severity INFO
FW-1441
Message <timestamp>, [FW-1441], <sequence-number>,, INFO, <system-name>, <FRU label>
state has changed to <FRU state>.