Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

Fabric OS Message Reference 353
53-1002149-01
FW-1205
45
FW-1205
Message <timestamp>, [FW-1205], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is below low boundaries (High=<High value>, Low=<Low value>). Current
value is <Value> <Unit>.
Probable Cause Indicates that the trunk utilization has reduced.
Recommended
Action
No action required.
Severity INFO
FW-1206
Message <timestamp>, [FW-1206], <sequence-number>,, WARNING, <system-name>, <Port Name>,
<Label>, is between high and low boundaries (High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause Indicates that the trunk utilization has gone above its threshold level.
Recommended
Action
Increase the bandwidth by adding more links to the trunk.
Severity WARNING
FW-1207
Message <timestamp>, [FW-1207], <sequence-number>,, INFO, <system-name>, <Port Name>,
<Label>, is between high and low boundaries (High=<High value>, Low=<Low value>).
Current value is <Value> <Unit>.
Probable Cause Indicates that the trunk utilization is between low and high thresholds.
Recommended
Action
No action required.
Severity INFO
FW-1244
Message <timestamp>, [FW-1244], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch receives has changed.
Receive performance messages appear due to the number of word frames that travel from the
configured S_ID to the D_ID pair.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.