Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

336 Fabric OS Message Reference
53-1002149-01
FW-1130
45
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1130
Message <timestamp>, [FW-1130], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of zone changes has fallen below the low boundary. Zone changes occur
when there is a change to the effective zone configuration. A low number of zone configuration
changes means that the fabric is functioning normally.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1131
Message <timestamp>, [FW-1131], <sequence-number>,, INFO, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of zone changes has risen above the high boundary. Zone changes occur
when there is a change to the effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO
FW-1132
Message <timestamp>, [FW-1132], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of zone changes has changed from a value outside of the acceptable
range to a value within the acceptable range. Zone changes occur when there is a change to the
effective zone configuration.
Recommended
Action
No action is required. Respond to this message as is appropriate to the particular policy of the
end-user installation.
Severity INFO