Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

Fabric OS Message Reference 213
53-1002149-01
FABR-1053
29
Probable Cause Indicates that the configured speed (16G/10G on non C3 blade or 1G on C3 blade) for the
specified port is invalid.
Recommended
Action
Execute the portcfgspeed command to change the port speed.
Severity INFO
FABR-1053
Message <timestamp>, [FABR-1053], <sequence-number>,, CRITICAL, <system-name>, The switch
is disabled due to an inconsistency found in the interop config parameters.
Probable Cause Indicates that the config keys have interopmode parameters such as switch.interopMode and
switch.mcdtFabricmode set.
Recommended
Action
Execute the interopmode command to reset the parameters.
Severity CRITICAL
FABR-1054
Message <timestamp>, [FABR-1054], <sequence-number>, FFDC, INFO, <system-name>, Rebooting
the standby as it received an update before port [<Port Number>] is expanded.
Probable Cause Indicates that the standby CP did not have the port because the port expand operation is still in
progress and the standby CP has received a port update. The standby CP reboots automatically to
ensure sync and attain normal state. This is a rare occurrence.
Recommended
Action
No action is required.
Severity INFO
FABR-1055
Message <timestamp>, [FABR-1055], <sequence-number>, FFDC, INFO, <system-name>, Maximum
number of retries sending ILS from domain <Domain number> exceeded.
Probable Cause Indicates the fabric exhausted the maximum number of retries.
Recommended
Action
Collect supportsave data using the supportSave command.
Severity INFO