Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

Fabric OS Message Reference 185
53-1002149-01
EM-1064
25
Recommended
Action
Remove the faulted blade.
Severity CRITICAL
EM-1064
Message <timestamp>, [EM-1064], <sequence-number>,, CRITICAL, <system-name>, Blade:<slot
ID> is being powered off (based on user configuration) upon receiving a HW ASIC
ERROR, reason:<Fault reason>.
Probable Cause Indicates the blade is being powered off because a hardware (HW) application specific integrated
circuit (ASIC) ERROR was detected, and you have selected to power off the problem blade when
such a condition occurred.
Recommended
Action
Contact the switch provider for support.
Severity CRITICAL
EM-1065
Message <timestamp>, [EM-1065], <sequence-number>,, WARNING, <system-name>, SAS
Virtualization Services are not available due to incompatibility between the FOS
and SAS versions<Slot number or blank for single board systems>.
Probable Cause Indicates the version of either the control processor firmware (CFOS) or the blade processor
firmware (BFOS) is not compatible with the Storage Application Services (SAS) or other application
firmware versions.
Recommended
Action
Upgrade the FOS firmware or the SAS firmware with the firmwareDownload command. Refer to the
release notes for a compatible version of firmware.
Severity WARNING
EM-1066
Message <timestamp>, [EM-1066], <sequence-number>,, INFO, <system-name>, SAS
Virtualization Services are now available <Slot number or blank for single board
systems>.
Probable Cause Indicates the previously incompatible Fabric OS or Storage Application Services (SAS) firmware has
been upgraded and is now compatible.
Recommended
Action
No action is required.
Severity INFO