Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

Fabric OS Message Reference 103
53-1002149-01
CDR-1008
14
Recommended
Action
No action is required.
Severity WARNING
CDR-1008
Message <timestamp>, [CDR-1008], <sequence-number>,, WARNING, <system-name>, S<slot
number>,C<chip index>: HW ASIC Chip warning Level 1 type = 0x<chip error type>.
Probable Cause Indicates an internal error in the ASIC hardware that may or may not degrade data traffic.
Recommended
Action
Whenever this error occurs, restart the system at the next maintenance window.
Severity WARNING
CDR-1009
Message <timestamp>, [CDR-1009], <sequence-number>,, WARNING, <system-name>, S<slot
number>,C<chip index>: HW ASIC Chip warning Level 2 type = 0x<chip error type>.
Probable Cause Indicates an internal error in the ASIC hardware that may or may not degrade data traffic.
Recommended
Action
Whenever this error occurs, restart the system at the next maintenance window.
Severity WARNING
CDR-1010
Message <timestamp>, [CDR-1010], <sequence-number>,, CRITICAL, <system-name>, S<slot
number>,C<chip index>: Internal monitoring of faults has identified suspect
hardware, blade may need to be reset or replaced: fault1:<fault1_cnt>,
fault2:<fault2_cnt> thresh2:0x<threshold_used>.
Probable Cause Indicates above normal errors observed in hardware that may or may not impact data traffic.
Recommended
Action
Whenever this error is observed persistently, power cycle the faulted blade. If the problem persists,
replace the blade.
Severity CRITICAL
CDR-1011
Message <timestamp>, [CDR-1011], <sequence-number>,, WARNING, <system-name>, S<slot
number>,P<port number>(<blade port number>): Link Timeout on internal port
ftx=<frame transmitted> tov=<real timeout value>(><expected timeout value>)
vc_no=<vc number> crd(s)lost=<Credit(s) lost> complete_loss:<complete credit
loss>.