Fabric OS Message Reference v7.0.0 (53-1002149-01, April 2011)

34 Fabric OS Message Reference
53-1002149-01
AG-1034
2
Severity INFO
AG-1034
Message <timestamp>, [AG-1034], <sequence-number>,, INFO, CFG, <system-name>,F_Port
cannot accept any more logins (<fport>) .
Probable Cause Indicates that the F_Port has already logged in the maximum number of devices.
Recommended
Action
No action is required.
Severity INFO
AG-1035
Message <timestamp>, [AG-1035], <sequence-number>,, INFO, CFG, <system-name>,Device
cannot login as ALPA value not available (<alpa>).
Probable Cause Indicates that a device has already used this ALPA value.
Recommended
Action
No action is required.
Severity INFO
AG-1036
Message <timestamp>, [AG-1036], <sequence-number>,, WARNING, CFG, <system-name>,Port
<port> is connected to a Non-Brocade fabric with Persistent ALPA enabled. Check
the admin guide for supported configuration .
Probable Cause Indicates that one of the ports is connected to a non-Brocade fabric.
Recommended
Action
No action is required.
Severity WARNING
AG-1037
Message <timestamp>, [AG-1037], <sequence-number>,, INFO, CFG, <system-name>,Trunked
N_Port (<nport>) going offline, if switchshow CLI for the connected fabric switch
port displays Persistently disabled: Area has been acquired, then check cabling:
all trunked ports should be in same ASIC Port Group .
Probable Cause Indicates that the cabling is incorrect.