HP IP/IPX Printer Gateway for NDPS - (English) Readme (version 3.00b)

E. INSTALLING THE SOFTWARE
Hpgw300b_en.exe is a self-extracting file that installs all the necessary files on
the designated NetWare 5.x or 6.x server.
Installing the HP Printer Gateway Software (see SECTION G. SPECIAL NOTES
for how to extract the HP Printer Gateway files without actual installation)
Warning: It is strongly recommended that you exit all local Windows programs
before running the installation program. You should also exit NWADMIN on
remote machines before installation. Otherwise, you may encounter an error
similar to the following:
1. From a Windows 9x, NT 4.0, 2000, or XP client, log in as Administrator to
the server.
2. Download/copy the appropriate installation file (hpgw300b_en.exe) to the
hard drive of the client.
3. Run the installation file (hpgw300b_en.exe) to begin the installation
process.
4. Click Next after reading the Welcome dialog box.
5. Click Yes to agree with the Software License Agreement.
6. Click OK for the warning about shutting down NWADMN32.EXE before
continuing.
7. In the Path To Server dialog box, click Browse to select the path to the
server (and to the Root directory of the Sys volume) on which you want to
install this software. For the installation process to continue, the directories
NDPS, PUBLIC, and SYSTEM must exist below the selected path.
8. Click YES to update the default value of “Timeout to Close Job” for the IP-
based printer agents.