HP IP/IPX Printer Gateway for NDPS - (English) Readme (version 3.00b)

How-To:
1. In the NDPS Manager box, type in the name of a fully qualified NDPS
Manager.
2. In the NDS Tree Name box, type in the name of the NDS Tree.
3. Click the Attach button. This will display a list of existing HP Gateway
Printer Agents.
4. You may filter the list of Printer Agents by protocol in the Protocol
Filter section. To see a list of IP-based Printer Agents, check the IP
box only. To see a list of IPX-based Printer Agents, check the IPX box
only.
5. Select those Printer Agents, in which you wish to update the “Timeout
to Close Job” value.
6. You may change the new “Timeout to Close Job” value by increasing
or decreasing the New Timeout to Close Job Value. We recommend
the default timeout value of 3 seconds to minimize delays between
print jobs.
7. Click the Update Timeout Values button to update the values.
Bench Mark: It took 10 minutes to update 600 printer agents (one second per
printer agent) on a 2.4 GHz single processor machine running NetWare 6.0
support pack 3.
Note: This program is run automatically during upgrade of HP Printer Gateway
version 3.00a or greater. The previous default value of 50 seconds for the
“Timeout to Close Job” will be updated to the new default value of 3 seconds for
all IP-based printer agents unless the user chooses not to do so.