HP IP/IPX Printer Gateway - (English) User Guide
22
Configuring Individual HP IP/IPX Printer Gateways
The following individual printer gateway settings can be changed:
• Status Update IntervalThe HP IP/IPX Printer Gateway uses two different printer status
update intervals. When the printer is idle, the HP IP/IPX Printer Gateway defaults to update
intervals of 15 minutes. Otherwise, the HP IP/IPX Printer Gateway defaults to update
intervals of 10 seconds. These settings have a direct effect on the timeliness of event
notifications. The update interval, for the When Idle and When Printing menu items, can
be modified as needed.
• MOD: Update time of dayThis menu item sets the time of day when the printer refreshes
the Managed Object Database (MOD), capturing any changes that have been made to the
printer but not to the database.
• Timeout to close jobThis menu item defines how long the HP IP/IPX Printer Gateway
will wait before closing the print job connection.
• MOD Update this printer gateway NOWThis menu item updates the MOD immediately.
• Printer Definition TypeDescribes the capabilities of specific printers. A file
corresponding to each type is included in NDPS to ensure that the features available in the
printers of today can be fully exploited by the NDPS discovery feature.
• Turn Printer SAPs OFF at startupThis menu item allows printer SAPs to be turned off
when the HP IP/IPX Printer Gateway is started, thereby reducing network traffic.
• Turn Printer SAPs ON at shutdownThis menu item allows printer SAPs to be turned on
when the HP IP/IPX Printer Gateway is shut down.
• MOD: Update the SNMP TimeoutThis menu item defines how long the HP IP/IPX
Printer Gateway will wait before closing the print job connection.
• Update the Printer Gateway with default parametersUpdates the loaded gateway with
all the new default parameters once the menu item parameter is set to Yes, and once the
settings on the screen are saved.
• Print a test pageWhen this menu item parameter is selected and [Enter] is pressed, a
simple text test page is sent to the physical printer. This can be used to verify the actual
connection between HP IP/IPX Printer Gateway and the printer.
To change the settings for individual HP IP/IPX Printer Gateways
1. At the server console, toggle to the Hewlett-Packard NDPS Gateway screen.
2. Select the Printer Gateways menu item from the Main Menu to display the Printer
Gateways menu screen.
3. Select the specific HP IP/IPX Printer Gateway you wish to modify from the printer gateways
list and then press [Enter].
4. Select the menu item(s) you want and then press [Enter].
5. Enter the value you want for the menu item parameter and then press [Enter] to save the
new value or press [Esc] to restore the old value.
Note: See the online help for detailed information about each option.
6. Press [Esc] to return to the previous menu.