HP IP/IPX Printer Gateway - (English) User Guide

18
Configuring HP IP/IPX Printer Gateway Settings
The following settings can be configured:
• Maximum Service ThreadsSpecifies the maximum number of processes (threads)
created to process jobs.
• Maximum Service ThreadsSpecifies the minimum number of processes (threads)
created to process jobs.
• Service Thread Idle TimeoutSpecifies the timeout (in minutes) that job processes wait in
an idle state before ending, until the Min Service Processes number is reached.
To configure the settings for the HP IP/IPX Printer Gateway
1. At the server console, toggle to the Hewlett-Packard NDPS Gateway screen.
2. Select the Configuration menu item from the Main Menu to start the Configuration menu
screen.
3. Select the Gateway Configuration menu item to start the Gateway Configuration menu
screen.
4. Select the menu item(s) you want to configure and then press [Enter].
5. Enter the value you want for the menu item parameter and then press [Enter] to save the
new value or press [Esc] to restore the old value.
Note: See the Readme file for detailed information about each menu item.
6. Press [Esc] to return to the previous menu.