HP IP/IPX Printer Gateway - (English) User Guide

16
14.4. Select either the Printer/Jetdirect or Specify Address or name radio button (The
default is Printer/Jetdirect). If you choose the Printer/Jetdirect radio button then
select a printer in the list box. Otherwise, manually enter the raw IP address or the
DNS name (if the Enable DNS lookups box was checked) of the printer you want in
the IP Address or name box.
14.5. Manually enter the printer port number in the Port box.
Note: If the printer you want does not appear in the list, you also have the option of
manually entering its address here. The ports can be 1, 2, or 3. Port 1 resolves to
any single-port HP Jetdirect print server. Ports 1, 2, and 3 resolve to the physical
ports on the multi-port HP Jetdirect external print servers.
Note: Review the notes in the previous Section: To create an HP public access printer in
Netware Administrator.
The main NetWare Administrator NDS screen should appear with your new controlled access
printer listed.