HP Intelligent Infrastructure Analyzer Software v2.2 Release Notes

Table 3 Issues and workaround (continued)
SolutionImpactIssues
To check the connected device MAC
address for Ethernet port. See the
Ethernet port connectivity and color
coding for the 5900 series is not
displayed in topology.
Topology, does not displayed
connected devices for Ethernet ports.
attached MAC address in the inventory
table.
Cascaded discovery is not supported
in the NPV mode. Enter the IP
When the 5900 series switches in
NPV mode are discovered, the other
Cascaded discovery is not supported
for 5900 series switches in NPV
mode. addresses, to discover switchesconnected switches are not
discovered. connected in NPV 5900 series switch
mode.
Set the switches to FCoE mode for IIAS
to monitor the 5900 series switches in
advanced mode.
IIAS does not monitor the SFPs of
5900 series switches if the switch
mode is set to advanced and FCoE
mode is not set.
HP 5900 series data collection fails
when FCoE mode is not set on the
switch.
If the serial number is the same, then it
can be considered as a single SFP
change.
Redundant events in IIAS for the same
serial number of the SFP, one from
physical port and other for VFC port.
Two events generated for SFP change
management for the ports configured
as VFC for 5900 series switches.
Specify the IP address to discover them
explicitly.
User is not be able to monitor devices
through IIAS that are not discovered
in the subnet scan.
Subnet discovery may not be able to
discover all devices in the given IP
range, if the switch response time for
SNMP is slow.
Collect the data from the switch for two
cycles, for SFP diagnostics and change
management to function.
All the collected data is reset. SFP
diagnostics and change management
will not function for one cycle after the
change in made.
When a switch is configured from
advanced mode to standard mode or
vice versa for 5900 series switches,
all IIAS information is lost, which was
collected from the previous mode.
Software Specification
HP Intelligent Infrastructure Analyzer Software (TC472-10501.exe)
Effective date
May 2014
Software Specification 7