HP Intelligent Infrastructure Analyzer Software User Guide

To deactivate a SAN profile:
1. Select the current active profile in the Manage SAN profiles page.
2. Click Deactivate.
3. The Deactivate SAN Profile window is displayed with the following message:
Do you wish to deactivate the SAN Profile XYZ (name of the SAN profile).
Click Yes to deactivate the SAN profile.
Click No to cancel the deactivation.
Delete SAN profile
To delete a SAN profile:
1. Select any deactive SAN profile in the Manage SAN Profiles page.
2. Click Delete.
3. The Delete SAN Profile window is displayed with the following message:
Do you wish to delete the SAN Profile XYZ (name of the SAN profile)
Click Yes to delete the SAN profile.
Click No to cancel the deletion.
NOTE: An active profile cannot be deleted.
Rescan SAN
Clicking on Rescan SAN initiates a data collection cycle for the active profile. This data collection
cycle is different than a system initiated cycle that occurs at an interval as set in the active profile.
Initiating a Rescan SAN request while the system initiated data collection cycle is in progress, the
system does not create a separate data collection cycle for rescan instead, the rescan is considered
as completed when the system initiated cycle ends.
To rescan a SAN profile, complete the following steps:
Click Rescan SAN from the navigation menu.
NOTE:
Rescan SAN works only on an active profile.
Timeout is 20 mins. Later, all DC's get aborted after 20 mins.
SAN Topology
Prerequisites for Topology
Java plug-in must be available in the Internet Explorer (IE) browser to view SAN topology .
Text and tool-tip for components in topology might not appear at times. Install the latest plug-in for
the IE being used, and the problem might resolve.
Overview
SAN topology depicts the topology of the SAN being monitored.
It keeps track of the following information:
Connectivity between components.
States of components and connectivity.
Number of connections between every pair of connected components.
14 Using HP IIAS