HP Intelligent Infrastructure Analyzer Software Quick Start Guide

NOTE: Creation of historical reports can take time, depending on the parameters specified.
Technical Specifications
The following are the system requirements for HP IIAS:
Table 1 Hardware and Software requirements
Supported platforms, versions, or configurationHardware and software requirements
Dual-core 2.0 GHz CPU or betterCPU
2 GB or higherRAM
250 MB
NOTE: Minimum 250 MB disk space is required on the drive where TEMP
folder is located.
Product installation disk space
requirements
300 - 350 MBMinimum disk space requirement
NOTE: Disk space will increase depending on the SAN size.
Version 8.0 or laterInternet Explorer
Operating System
• Windows Server 2003/2008 (x86, x64)
• Windows XP
• Windows Vista
• Windows 7
NOTE: These operating systems require their respective latest service packs.
For more information, see “Installing OS specific service packs” (page 5).
HP IIAS version 1.0 supports IPV4 only. The host where HP IIAS and the devices
(FC Switches) are installed, must have IPV4 addresses.
IP network addresses
Installing OS specific service packs
Table 2 IIAS Management Server
ArchitectureRevisionOS VersionOS
x86SP2Standard Edition or Enterprise EditionWindows Server 2003
x64
x86SP2Standard Edition or Enterprise EditionWindows Server 2003 R2
x64
x86SP2Standard Edition or Enterprise EditionWindows Server 2008
x64
x64No SPEnterprise EditionWindows Server 2008 R2
x86SP1Business or Enterprise EditionWindows Vista
x86SP3Professional EditionWindows XP
x64SP1Enterprise EditionWindows 7
X86
For more information on installing, configuring, and using HP Intelligent Infrastructure Analyzer
Software, see the HP Intelligent Infrastructure Analyzer Software User Guide. For release specific
information, see the HP Intelligent Infrastructure Analyzer Software Release Notes.
Technical Specifications 5