Installing and Managing HP-UX Virtual Partitions (A.01.01)

Planning Your Virtual Partitions and Installing vPars
Planning Your Virtual Partitions
Chapter 4 57
Ensuring the Hardware Console Port Is Owned by the First
Virtual Partition
In our example computer, the hardware console port is at 0/0/4/0,
which uses the LBA at 0/0. The LBA 0/0 is owned by the partition
winona1:
When we create the virtual partitions, we will create winona1 first.
CAUTION One of the virtual partitions must own the LBA that contains the
physical hardware console port.
Choosing the Boot and Lan Paths
Using the full ioscan output, we chose the following boot disk path and
note the LAN card path:
console port
0/0/4/0
LBA
0/0
partition
winona1
console port
owned by winona1
Partition
Name
winona1 winona2 winona3
Boot Path
0/0/2/0.6.0 0/8/0/0.5.0 1/4/0/0.5.0
LAN
0/0/0/0 1/10/0/0/4/0 0/5/0/0/4/0