HP vPars and Integrity Virtual Machines V6.1 Administrator Guide

ManualsBrandsHP ManualsSoftwareHP Integrity Virtual Machines and Online VM Migration Software

3 Installation procedures for HP-UX vPars and Integrity VM

V6.1

This chapter describes the requirements and procedures for installing vPars and Integrity VM V6.1.

The topics include:

• Installing vPars and Integrity VM V6.1

• Bundle names

• Verifying the installation

• Removing vPars and Integrity VM V6.1

3.1 Installing vPars and Integrity VM V6.1

The following sections provide the installation procedures for vPars and Integrity VM V6.1.

3.1.1 vPars V6.1 installation requirements

vPars V6.1 is installed on the VSP after installing the BB068AA and VirtualBase bundles on the

VSP from a distribution media. Table 5 (page 35) lists the software products that must be installed

on the VSP and on vPars V6.1.

Table 5 Software required to be installed on VSP and vPar OS

vPar OSVSP

HP-UX 11i v3 September 2011 (AR1109) or later (any OE) on

HP Integrity Server Blade system BL8x0c i2 servers

HP-UX 11i v3 March 2012 (AR1203) HP Integrity Superdome

2 servers

HP-UX 11i v3 March 2012 (AR1203) (Base OE,

VSE-OE, or DC-OE)

VirtualBaseBB068AA, VirtualBase

HP-UX GUID Manager (optional)HP-UX GUID Manager

Following Serviceguard patches (applicable only if Serviceguard

is installed):

• PHSS_42136

• PHSS_42137

Following Serviceguard patches (applicable only if

Serviceguard is installed):

• PHSS_42136

• PHSS_42137

NOTE: The vPars V6.1 bundle BB068AA does not include the vPars V6.1 GUI (Integrity Virtual

Server Manager) software. The Integrity Virtual Server Manager is a separately installed ISU bundle.

Integrity Virtual Server Manager can be downloaded from the HP Software Depot at http://

www.software.hp.com.

Table 6 VxVM and System Fault Management

System Fault ManagementVxVM

Update System Fault Management software to:

• ProviderSvcsBase C.06.00.05.02 Provider Services

Base

• SysFaultMgmt C.07.04.07.03 HPUX System Fault

Management

If using VxVM 5.0.1, install PHKL_42649,

PHCO_42677and PHCO_42648 patches.

NOTE: Both ProviderSvcsBase and SysFaultMgmt are included in the WBEM Management bundle

— https://h20392.www2.hp.com/portal/swdepot/displayProductInfo.do?

productNumber=WBEMMgmtBundle

3.1 Installing vPars and Integrity VM V6.1 35