HP vPars and Integrity Virtual Machines V6.1 Administrator Guide

You can pass a command to the vPar/VM console using the —c option to the hpvmconsole

command. For example, to start a virtual machine named host1, enter the following command:

# hpvmconsole -P host1 -c "pc -on"

Table 26 lists the options to the hpvmconsole command.

Table 26 Options to the hpvmconsole Command

DescriptionOption

Specifies the name of the virtual machine console to open.-P vm-name

Specifies the number of the virtual machine console to open.-p vm-number

Specifies a machine console command to run on the virtual machine.-c command

Specifies an alternate interrupt character. The default interrupt character is Ctrl/B, unless the session

is on the VSP's /dev/console, in which case, use the Ctrl/X.

-e echar

Follows the console output after reaching EOF on standard input. Used for scripting.-f

Interacts with the console. Used for scripting.-i

Makes scripted operations less verbose.-q

To get information about using the virtual console, enter the HE command. For example:

[host1] vMP> he

==== vMP Help: Main Menu ================================= (Admin) ============

HPVM B.06.10 ccipf opt Thu Dec 01 2011

Virtual Management Processor (vMP) Help System

Enter a command at the help prompt:

OVerview - Launch the help overview

LIst - Show the list of vMP commands

<COMMAND> - Enter the command name for help on an individual command

TOPics - Show all vMP Help topics and commands

HElp - Display this screen

Q - Quit help

For more information about using the hpvmconsole command, see hpvmconsole(1M).

11.6 Using the virtual console 177