HP-UX vPars and Integrity VM V6.3 Administrator Guide

LV Size (Mbytes) 8192
Current LE 2048
Allocated PE 2048
Used PV 1
LV Name /dev/lvrackA/disk2
LV Status available/syncd
LV Size (Mbytes) 8192
Current LE 2048
Allocated PE 2048
Used PV 1
LV Name /dev/lvrackA/disk3
LV Status available/syncd
LV Size (Mbytes) 8192
Current LE 2048
Allocated PE 2048
Used PV 1
LV Name /dev/lvrackA/disk4
LV Status available/syncd
LV Size (Mbytes) 8192
Current LE 2048
Allocated PE 2048
Used PV 1
--- Physical volumes ---
PV Name /dev/disk/disk237
PV Status available
Total PE 8681
Free PE 489
Autoswitch On
In this example, the Virtual LvDisk resource statement form is
disk:avio_stor::lv:/dev/lvrackA/rdisk2.
To use VxVM, the following is the Virtual LvDisk resource statement form:
disk:avio_stor::lv:/dev/vx/rdsk/dg_name/v_name
where /dev/vx/rdsk/dg_name/v_name is a VxVM character device file for volume v_name
on disk group dg_name. To view the VxVM character device file name, enter the following
command:
# vxprint
Disk group: rootdg
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0
PUTIL0
dg rootdg rootdg - - - - - -
dm disk01 c3t0d0 - 35562538 - - - -
Disk group: VxvmTest1
TY NAME ASSOC KSTATE LENGTH PLOFFS STATE TUTIL0
PUTIL0
dg VxvmTest1 VxvmTest1 - - - - - -
dm disk01 c5t8d0 - 780564 - - - -
v vxvm_1 fsgen ENABLED 2048000 - ACTIVE - -
pl vxvm_1-01 vxvm_1 ENABLED 2048000 - ACTIVE - -
sd disk01-01 vxvm_1-01 ENABLED 2048000 0 - - -
v vxvm_2 fsgen ENABLED 2048000 - ACTIVE - -
pl vxvm_2-01 vxvm_2 ENABLED 2048000 - ACTIVE - -
80 Storage devices