HP-UX vPars and Integrity VM V6.3 Administrator Guide

[Virtual CPU Details]
Number Virtual CPUs : 1
Minimum Virtual CPUs : 1
Maximum Virtual CPUs : 32
Percent Entitlement : 10.0%
Maximum Entitlement : 100.0%
[Memory Details]
Total memory : 2 GB
Minimum memory limit : 512 MB
Maximum memory limit : 256 GB
Reserved memory : 64 MB
Minimum reserved limit : 32 MB
Maximum reserved limit : 256 GB
VHPT Size : 1 MB
Overhead memory : 128 MB
[Dynamic Memory Information]
NOTE: Dynamic data unavailable, configured values only
Type : driver
Minimum memory : 512 MB
Target memory : 2048 MB
Memory entitlement : Not specified
Maximum memory : 2048 MB
[Storage Interface Details]
Device type : disk
Adapter type : avio_stor
Ioscan format : 0/0/0/0.0.0
Bus : 0
Device : 0
Function : 0
Target : 0
Lun : 0
Physical Storage type : disk
Physical Device : /dev/rdisk/disk25
[Network Interface Details]
[Direct I/O Interface Details]
[Misc Interface Details]
Device type : serial
Adapter type : com1
Physical Storage type : tty
Physical Device : console
To view the VSP system resource, use the -s option with the hpvmstatus command. For example:
# hpvmstatus -s
[HPVM Server System Resources]
vPar/VM types supported by this VSP = vPar, Shared
Processor speed = 1330 Mhz
Total physical memory = 32659 Mbytes
Total number of operable system cores = 8
CPU cores allocated for VSP = 1
CPU cores allocated for vPars and VMs = 7
CPU cores currently in use or reserved for later use = 1
Available VSP memory = 1290 Mbytes
Available swap space = 6750 Mbytes
Total memory allocated for vPars and VMs = 27392 Mbytes
Memory in use by vPars and VMs = 1600 Mbytes
Available memory for vPars and VMs = 25792 Mbytes
Available memory for 6 (max avail.) CPU VM = 25088 Mbytes
Available memory for 6 (max avail.) CPU vPar = 25664 Mbytes
Maximum vcpus for an HP-UX virtual machine = 7
13.1 Monitoring guests 219