HP-UX Virtual Partitions Ordering and Configuration Guide (March 2011)

Table 26 vPars A.05.08 Minimum Required Card-Related Firmware (EFI, ROM, and Boot Code)
Flash Utility
VersionFlash Utility
Boot Code
File
Network
(NIC) EFI
Firmware
Version
FC/SCSI/RAID
HBA
Firmware
Version
FC/SCSI/RAID
EFI Driver
VersionDescription
Card
Product
Number
1
B.00.44FCFUPDATE5.2.51
2
5.2.27
2
——PCIe 2-port
10GbE-SR
AM225A
B.00.44FCFUPDATE5.2.51
2
5.2.27
2
——PCIe 2-port
10GbE-LR
AM232A
B.00.44FCFUPDATE5.2.51
2
5.2.27
2
——PCIe 2-port
10GbE-Cu
AM233A
1 In addition to the cards supported for vPars A.05.07, three new cards listed here are supported for vPars A.05.08.
2 HP recommends that you update EFI driver to version 5.2.53 and boot code to version 5.2.70.
4.3.4 Checking Card Firmware Versions (Integrity)
EFI Drivers
In nPars mode from the EFI Shell, use the drivers command to determine the version. The VERSION
column lists the version. For example:
Shell> search all
Shell> drivers
T D
D Y C I E
R P F A B
V VERSION E G G C #D #C DRIVER NAME IMAGE NAME Comments
== ======== = = = = == == ============================== ===================
41 0007000A ? X X - - - Broadcom Gigabit Ethernet Driv BRM5701_LAN--------
47 B0000145 ? X X X - - QLogic Fibre Channel Driver S=0E B=16 D=4 F=0 I=0
48 0007000B B X X - 4 4 Broadcom Gigabit Ethernet Driv S=0E B=16 D=6 F=0 I=0
49 01040200 B X X - 4 22 LSI Logic Fusion MPT Driver S=0E B=2A D=1 F=0 I=0
4A B0000145 ? X X X - - QLogic Fibre Channel Driver S=0E B=40 D=4 F=0 I=0
4B 0007000B B X X - 1 1 Broadcom Gigabit Ethernet Driv S=0E B=40 D=6 F=0 I=0
4C 01030200 B X X - 2 12 LSI Logic Ultra160 SCSI Driver S=0E B=69 D=1 F=0 I=0
4D 0000FF33 D X X - 2 - HP XL2 Fibre Channel Mass Stor S=0E B=93 D=1 F=0 I=0
4E B0000147 B X X X 2 10 HP 2 Gb Fibre Channel Driver S=0E B=D4 D=1 F=0 I=0
1
4F 01030000 ? X X - - - LSI Logic Ultra320 SCSI Driver S=0A B=2B D=4 F=0 I=0
50 00002160 ? - - - - - Intel(R) PRO/1000 v2.16 EFI-64 S=0A B=2B D=6 F=0 I=0
1
This line shows the current version for the HP 2 GB Fibre Channel Driver as 1.47.
Boot Code for the A9782A, A9784A, and AB465 Cards
1. In nPars mode from the EFI device prompt, issue the ode fcfupdate command. For example:
Shell>fs0: ode fcfupdate
***************************************************************************
* List of Supported IO Cards *
***************************************************************************
Index Card Name H/W Path FW Revision
----- ------------------ ----------------------------- ------
0 HP A9782A/LAN Card Acpi(000222F0,0)/Pci(1|0)/Pci(6|0) 7000a
***************************************************************************
* List of Firmware Files found *
***************************************************************************
File Name Ver. Size Vendor ID & Device ID Supported
--------------------- ------ ------ -----------------------------
brcm_efi.frm 7000b 79872 0x14e4 0x16c7
a9782a_bc.frm 230 11288 0x14e4 0x16c7
2. To display the boot code version, execute the dispbc command. For example:
FCFUPDATE> dispbc
Card Boot Code Rev
58 Supported Configurations