HP-UX Virtual Partitions Administrator Guide (includes A.05.09) (5900-2188, March 2012)

============================== ====================== ======================
thurman24 0/ 0 1024 0/ 0 0
thurman25 1/1024 1024 0/ 0 0
thurman26 0/ 0 1024 1/ 256 256
thurman27 1/ 512 1024 1/ 768 1024
vparstatus: Verbose Information
Use vparstatuswith verbose (-v) option.
Examples
• vPars A.03.xx on a rp7400:
winona1# vparstatus -p winona2 -v
[Virtual Partition Details]
Name: winona2
State: Up
Attributes: Dynamic,Autoboot
Kernel Path: /stand/vmunix
Boot Opts:
[CPU Details]
Min/Max: 1/8
Bound by User [Path]: 41
45
Bound by Monitor [Path]:
Unbound [Path]: 97
[IO Details]
0.8.0.0.5.0 BOOT
0.8
1.10
[Memory Details]
Specified [Base /Range]:
(bytes) (MB)
Total Memory (MB): 1280
• vPars A.04.xx on an Integrity Superdome:
thurman24# vparstatus -p thurman25 -v
[Virtual Partition Details]
Name: thurman25
State: Up
Attributes: Dynamic,Autoboot,Nosearch
Kernel Path: /stand/vmunix
Boot Opts:
[CPU Details]
Min/Max: 1/28
User assigned [Path]:
Boot processor [Path]: 13.120
Monitor assigned [Path]: 1.121
1.122
3.122
3.123
4.121
Non-cell-specific:
User assigned [Count]: 1
Monitor assigned [Count]: 3
Cell-specific [Count]: Cell ID/Count
1 2
[IO Details]
1.0.12
Commands: Displaying vPars Monitor and Resource Information (vparstatus) 137