HP-UX Virtual Partitions Administrator Guide (includes A.05.08) (5900-1312, March 2011)

NOTE: Read the following rules and the table below when running a mixed HP-UX 11i v2/v3
vPars environment. Many of the features of vPars are version-specific.
To switch to an environment of only virtual partitions running vPars A.04.xx on HP-UX 11i v2, shut
down the A.05.01 vPars Monitor and boot up the A.04.xx vPars Monitor.
Features
The following features work from all virtual partitions:
• legacy vPars functions
This includes dynamic CPU migration, except where noted below.
• HP-UX functions
All the corresponding HP-UX features associated with an HP-UX 11i release continue to work.
Note that, as in a normal OS instance, an 11.31-only feature will not work in an 11.23
OS-instance.
• HT OFF
All virtual partitions can boot and run when hyperthreading is disabled (HT is set to OFF).
Mixed HP-UX 11i v2/v3 vPars Environments in vPars A.05.xx 59