HP Integrity Virtual Machines 4.3: Installation, Configuration, Administration

====== =========== ======= ======= ================
0 108MHz 1300MHz 1.9% 469302
Startable virtual machines:
vm1,vm2,vm3,vm4,vm5,vm6
Display the system resources on the VM Host system:
# hpvmstatus -s
[HPVM Server System Resources]
Processor speed = 900 Mhz
Total physical memory = 6132 Mbytes
Total number of processors = 2
Available memory = 2557 Mbytes
Available swap space = 1541 Mbytes
Maximum vcpus for an HP-UX virtual machine = 2
Available entitlement for a 1 way virtual machine = 900 Mhz
Available entitlement for a 2 way virtual machine = 810 Mhz
Display the Serviceguard server information on the VM Host system:
# hpvmstatus -m
HPVM Multi-server environment
Server group name : HPVM-SG-hpvm_sg_1131
Server group uuid : 45e2a680-af14-11dc-9e00-00306e4a831c
This server's identifier: 2
Server_id : 2
Server_state : 1
Server_ipaddr : 10.0.128.1
Server_hostname : troop
Server_uuid : 12345678-abcd-1234-abcd-123456789012
Server_physical_uuid : 58d03f5d-79ed-11d9-b720-17c097e9e0d0
Server_id : 1
Server_state : 1
Server_ipaddr : 10.0.128.159
Server_hostname : company
Server_uuid : 23456789-abcd-5678-efgh-123456789012
Server_physical_uuid : 560ef4fb-7e-11d7-86df-c7749ef083ae
Display the devices on the specified virtual machine in the same format used on the command
line:
# hpvmstatus -P hpvm0014 -d
[Virtual Machine Devices]
[Storage Interface Details]
disk:scsi::0,0,1:lv:/dev/vg01/rlv2
[Network Interface Details]
network:lan:0,1,0x56A3E9D74099:vswitch:myswitch
[Misc Interface Details]
serial:com1::tty:console
Display whether the guests prefer cell local memory (clm), interleaved memory (ilm) or none.
Note that none, ilm or cell are displayed in the Cell Prefer column for guests that are
not started. Once started, the cell number, or ilm is displayed.
Memory listed as Other Cell represents memory allocated outside of the preferred (home)
cell. If there is insufficient clm, memory can be allocated across all cells. In this case, ilm is the
Cell Prefer entry and the amount of ilm and clm allocated is displayed in the Interleave
and Other Cell columns accordingly.
#hpvmstatus -C
# hpvmstatus -c
351