sx2000 Servers

Figure 44 MP Command Option

5. In the another window, open the Virtual Front Panel (VFP) by entering vfp at the MP prompt

(Figure 45). Use this window to observe partition status.

Figure 45 MP Virtual Front Panel

6. From the VFP menu, enter s to select the whole system, or enter the partition number to select

a particular partition. An output similar to Figure 46 appears. In this example, no status is

listed because the system 48 V has not been switched on.

Figure 46 Example of Partition State—Cabinet Not Powered Up

Booting and Verifying the System 51