Site Preparation Guide, Fifth Edition - HP Integrity Superdome and HP 9000 Superdome

Chapter 4
Environmental Requirements
Power Dissipation
33
Power Dissipation
Table 4-3 and Table 4-4 show the power requirements by configuration (i.e. number of cell boards, amount of
memory per cell, and number of I/O chassis) for the hp Integrity Superdome and the hp 9000 Superdome,
respectively.
There are two columns of power numbers (Watts). The Power Breaker column shows the power used to size
the wall breaker at the installation site. The Typical Power column shows typical power. Typical power
numbers may be used to assess average utility cost of cooling and electrical power. These tables also show the
recommended breaker sizes for 4-wire and 5-wire sources