TS/MP 2.5 Pathsend and Server Programming Manual

INT returns a file-system error number indicating the outcome of the operation.

inputpathmon-process-name

STRING:ref:EXT:*

contains the external Guardian process name of the PATHMON process controlling the server-class

(for example, $PM or \AB.$PMN).

is the pathway domain name, whose member PATHMON processes have the server-class configured

under them (for example, %DOM, %DOM1).

The process name portion can have up to five characters after the dollar sign ($), if it is a local

process name, and up to four characters after the $ sign if it is a process on a remote system. The

name cannot include an optional first or second name qualifier. The name must be left justified in

the buffer, and can contain trailing blanks.

The domain name portion can have minimum two and a maximum of eight characters. It must begin

with a ‘%’ sign and can contain alphanumeric characters. Also, special characters, ‘-‘ and ‘_’ are

allowed. Since Pathway domain is a logical entity, it cannot be qualified by the node name.

This is a mandatory parameter.

inputpathmon-process-name-len

INT:value is the byte length of the pathmon-process-name string. This value can range from 2 through 15.

This is a mandatory parameter.

inputserver-class-name

STRING:ref:EXT:*

contains the name of the server-class to be sent to (for example, EMP-SERVER). This name must

conform to the Pathway server-class naming rules, must be left justified in the buffer, and can contain

trailing blanks. This server-class name, along with the pathmon-process-name, uniquely identifies

a server-class.

This is a mandatory parameter.

inputserver-class-name-len

INT:value

is the byte length of the server-class-name string. This value can range from 1 through 15.

This is a mandatory parameter.

input, outputmessage-buffer

contains the message to send to the server-class. If the reply-buffer is not mentioned in the

SERVERCLASS_SENDL_ procedure, on successful completion of the send operation, the

message-buffer contains the reply from the server-class.

This is a mandatory parameter.

outputreply-buffer

STRING .EXT:ref.*

contains the reply from the server-class on successful completion of the send operation.

inputrequest-len

INT(32):value

is the byte length of the data contained in the write-buffer. The range of acceptable values is 0

through 2097152.

This is a mandatory parameter.

inputmaximum-reply-len

SERVERCLASS_SENDL_ Procedure 95