Pathway/iTS System Management Manual (H06.03, J06.03+)

TERM Commands
HP NonStop Pathway/iTS System Management Manual—426748-005
10-3
ABORT TERM Command
•
The coupling information is lost after issuing an ABORT command.
Examples
The following commands abort the specified TERM objects:
ABORT TERM TERM-1
ABORT TERM-2
ABORT TERM(TERM3,TERM4)
ABORT (TERM-5,TERM-6)
The following command aborts all TERM objects in the PATHMON environment:
ABORT TERM *
The following command stops all TERM objects in the SUSPENDED state under the
control of the TCP named TCPA:
ABORT TERM *, STATE SUSPENDED, TCP TCPA