NonStop NS16000 Series Planning Guide (H06.11+)

• Added IB CLIM by changing “IP or Telco CLIM” to “networking CLIM” in “Processor Switches
to Networking CLIMs” (page 76).
• Added notes to illustrations in “Storage CLIM Devices” (page 80).
• Changed “SAS Ports to SAS Disk Enclosures” (page 82).
• Changed “Configuration Restrictions for Storage CLIMs” (page 82).
• Added IB CLIM and corrected Storage CLIM naming convention in “Default Naming
Conventions” (page 105).
• Changed “IP CLIM” to “CLIM” in “Processor Switch” (page 112).
• Changed “PID” to Name on Label” and added IB CLIM in “CLuster I/O Modules (CLIMs)”
(page 115) and Table 5 (page 116).
• Added “IB CLuster I/O Module (CLIM) (Optional)” (page 121).
• Added coexistence of DL385 G5 Storage CLIMs and DL380 G6 Storage CLIMs, note about
maximum SAS disk enclosures, and notes in tables in “Storage CLuster I/O Module (CLIM)”
(page 123).
• Added footnote to table, changed “HP StorageWorks” to “HP Storage,” and for D2700 SAS
disk enclosure added SSDs and disk partitioning feature to “Serially Attached SCSI (SAS) Disk
Enclosure” (page 124).
• In “Hardware Configurations” (page 135):
Changed chapter title.◦
◦ Removed initial paragraph and note.
◦ Changed title of “Minimum and Maximum Hardware Configuration” (page 135), removed
typical values, and grouped CLIMs with a cross-reference.
◦ Removed examples of configurations.
◦ Moved “Enclosure Locations in Cabinets” (page 135) into chapter, removed table of
enclosure location rules, and pointed to the Technical Document shipped with the system
or components.
• Deleted “IP” from “IP CLIM” to Include all types of CLIMs in “Maintenance and Support
Connectivity” (page 136), “Basic LAN Configuration” (page 137), “Fault-Tolerant Configuration”
(page 138), and “One System Console Managing Multiple Systems” (page 148).
• Changed table row to Maintenance switch (ProCurve) (Additional switches) and added range
of IP addresses in “IP Addresses” (page 140) to cover more that two maintenance switches.
• In Appendix “Cables” (page 150):
Combined cable tables into “Cable Types, Connectors, Lengths, and Product IDs”
(page 150).
◦
◦ Changed “Storage CLIM SAS HBA port to SAS tape” to “DL385 G5 Storage CLIM SAS
HBA port to SAS tape (carrier-grade tape only)”.
◦ Added cable for DL380G6 Storage CLIM to M8381-25 (D2700) SAS disk enclosure.
◦ Added cable for M8380-25 (MSA70) SAS disk enclosure to M8380-25 (MSA70) SAS
disk enclosure (daisy-chain).
◦ Added row for DL380 G6 IB CLIM HCA port to customer-supplied IB switch.
◦ Added Maintenance LAN interconnect (CAT 5e and CAT 6).
◦ Below table added notes about ServerNet cluster connections and BladeCluster
connections.
New and Changed Information 9