NonStop NS16000 Series Planning Guide (H06.11+)

New and Changed Information for 529567–016
• Corrected the operating temperatures under “Operating Temperature, Humidity, and Altitude”
(page 61) and “Nonoperating Temperature, Humidity, and Altitude” (page 62).
• Indicated that when connecting a networking CLIM, slot 4 might already be used for S-series
networking. If that is the case, use slots 5 through 9, starting with 9, for NS-series networking
CLIMs. Updated:
◦ “Processor Switch Group-Module-Slot Numbering” (page 26)
◦ “CLIM Connection Group-Module-Slot-Port Numbering” (page 27)
◦ “Processor Switch ServerNet Connections” (page 75)
• Indicated under “Default Naming Conventions” (page 105) that changing the process names
for $ZTCP0 and $ZTCP1 will make some components inaccessible.
• Changed the weight of the PDU monitored configuration from 303 lbs. to 328 lbs. due to the
additional weight of the rack extension. See “Modular Cabinet and Enclosure Weights With
Worksheet” (page 59), Table 2: Cabinet One Load Calculations (page 63), Table 3: Cabinet
Two Load Calculations (page 64), and Table 4: Cabinet Three Load Calculations (page 64).
New and Changed Information for 529567–015
The following topics have been updated:
• Chapter 1 (page 19)
• Chapter 3 (page 37)
• Chapter 4 (page 66)
• Chapter 5 (page 107)
• Chapter 6 (page 135)
• Chapter 7 (page 136)
• Appendix B (page 155)
• Appendix D (page 161)
Document Organization
This document has the following chapters.
Chapter 1: NonStop NS16000 Series System Overview
This chapter provides an overview of the modular Integrity NonStop NS16000 series system
hardware.
Chapter 2: Site Preparation Guidelines
This chapter outlines topics to consider when planning or upgrading the installation site.
Chapter 3: System Installation Specifications
This chapter provides the installation specifications for fully populated Integrity NonStop
NS16000 series enclosures.
Chapter 4: System Configuration Guidelines
This chapter describes the guidelines for implementing the modular hardware.
Chapter 5: Modular System Hardware
This chapter includes topics to consider when planning or upgrading the installation site.
Chapter 6 (page 135)
This chapter shows example configurations of the Integrity NonStop NS16000 series modular
hardware.
Document Organization 15