NonStop NS1000 Planning Guide (H06.08+)

HP Integrity rx2620 Server Description
The HP Integrity rx2620 server is 2U and weighs 46 pounds (25 kilograms), is rackmountable,
has redundant AC power feeds, and provides front-to-rear cooling. Each HP Integrity rx2620
server contains:
DescriptionComponent
A single 1.3 GHz 3 MB Intel Itanium
microprocessor with its associated 4
GB or 8 GB memory. The memory is
accessed from the top of the enclosure
when the enclosure is pulled forward
on its rails.
One processor element (PE)
Used for ServerNet fabric
connections. One PCI card is installed
in slot 2.
One “ServerNet PCI Adapter Card”
(page 60)
Contains the HSS Boot CD. The CD
must remain in the blade element.
The CD cannot be ejected until the
blade element is powered off.
One DVD drive
Provides power to the blade element.
The power supplies are accessed from
the back of the enclosure.
Two power supplies
Provides cooling for the system,
memory, and PCI card. The fans are
accessed from the top of the enclosure
when the enclosure is pulled forward
on its rails
Four fans (contained in three fan
assemblies)
These components can be replaced
by service providers trained by HP:
Field-Replaceable Units (FRUs)
Blade Element 57