HP Integrated Lights-Out Addendum

<AUTHENTICATION_FAILURE_LOGGING
VALUE="Enabled-every 3rd failure"/>
<REMOTE_KEYBOARD_MODEL VALUE="US"/>
<RBSU_POST_IP VALUE="Y"/>
<HIGH_PERFORMANCE_MOUSE
VALUE="Enabled"/>
<REMOTE_CONSOLE_ACQUIRE VALUE="Y"/>
<CONSOLE_CAPTURE_ENABLE
VALUE="Disabled"/>
<CONSOLE_CAPTURE_BOOT_BUFFER_ENABLE
VALUE="Disabled"/>
<CONSOLE_CAPTURE_FAULT_BUFFER_ENABLE
VALUE="Disabled"/>
<INTERACTIVE_CONSOLE_REPLAY_ENABLE
VALUE="Disabled"/>
<CAPTURE_AUTO_EXPORT_ENABLE
VALUE="Disabled"/>
<CAPTURE_AUTO_EXPORT_LOCATION
VALUE="http://192.168.1.1/folder/captu
re%h%t.i
lo"/>
<CAPTURE_AUTO_EXPORT_USERNAME
VALUE=""/>
<CAPTURE_AUTO_EXPORT_PASSWORD
VALUE=""/>
<SHARED_CONSOLE_ENABLE
VALUE="Enabled"/>
<ENFORCE_AES VALUE="N"/>
</GET_GLOBAL_SETTINGS>
MOD_GLOBAL_SETTINGS
Use the MOD_GLOBAL_SETTINGS command to modify global
settings. For this command to parse correctly, the command must
appear within a RIB_INFO command block, and RIB_INFO MODE
must be set to write. The user must have the configure iLO privilege
to execute this command.
The Lights-Out device (not the server) resets to make changes to port
settings effective. To disable the management functions of iLO and
iLO 2, set the ILO_FUNCT_ENABLED to No. If disabled, you must use
the iLO Security Override Switch on the server system board and the
iLO 2/iLO RBSU (F8 key) to re-enable iLO 2/iLO.
Use CPQLOCFG.EXE version 2.26 or greater with this script.
Example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname"
PASSWORD="password">
<RIB_INFO MODE="write">
<MOD_GLOBAL_SETTINGS>
<SESSION_TIMEOUT value="60"/>
<F8_PROMPT_ENABLED value="Yes"/>
<HTTP_PORT value="80"/>
<HTTPS_PORT value="443"/>
<REMOTE_CONSOLE_PORT value="23"/>
<REMOTE_CONSOLE_PORT_STATUS
value="2"/>
<RAW_SERIAL_PORT value="3002"/>
<!-- Firmware support information for
next 6 tags: -->
<!-- iLO 2 - All versions. -->
<!-- iLO - Version 1.50 and later. -->
<!-- RILOE II - None. -->
<REMOTE_CONSOLE_ENCRYPTION
value="Yes"/>
<MIN_PASSWORD value="8"/>
<ILO_FUNCT_ENABLED value="Yes"/>
<VIRTUAL_MEDIA_PORT value="17988"/>
<F8_LOGIN_REQUIRED value="No"/>
<REMOTE_KEYBOARD_MODEL value="US"/>
<!-- Firmware support information for
next 2 tags: -->
<!-- iLO 2 - All versions. -->
<!-- iLO - Version 1.50 and later. -->
<!-- RILOE II - Version 1.20 and later. -
->
<PASSTHROUGH_CONFIG value="1"/>
<TERMINAL_SERVICES_PORT value="3389"/>
<!-- Firmware support information for
next 5 tags: -->
<!-- iLO 2 - All versions. -->
<!-- iLO - Version 1.60 and later. -->
<!-- RILOE II - None. -->
<SSH_PORT value="22"/>
<SSH_STATUS value="Yes"/>
<SERIAL_CLI_STATUS value="3"/>
<SERIAL_CLI_SPEED value="1"/>
<RBSU_POST_IP value="Y"/>
<!-- Firmware support information for
next tag: -->
<!-- iLO 2 - All versions. -->
<!-- iLO - None. -->
<!-- RILOE II - None. -->
<TELNET_ENABLE value="yes"/>
<!-- Firmware support information for
next tag: -->
<!-- iLO 2 - All versions. -->
<!-- iLO - Version 1.75 and later. -->
<!-- RILOE II - None. -->
<HIGH_PERFORMANCE_MOUSE value="Yes" />
<!-- Firmware support information for
next 13 tags: -->
<!-- iLO 2 - Version 1.30 and later. -->
<!-- iLO - None. -->
<!-- RILOE II - None. -->
<ENFORCE_AES value="Y"/>
<AUTHENTICATION_FAILURE_LOGGING
value="3"/>
<CONSOLE_CAPTURE_ENABLE value="Yes" />
<CONSOLE_CAPTURE_BOOT_BUFFER_ENABLE
value="Yes" />
<CONSOLE_CAPTURE_FAULT_BUFFER_ENABLE
value="Yes" />
<INTERACTIVE_CONSOLE_REPLAY_ENABLE
value="Yes" />
<CONSOLE_CAPTURE_PORT value="17990" />
<CAPTURE_AUTO_EXPORT_ENABLE value="No"
/>
<CAPTURE_AUTO_EXPORT_LOCATION
value="HTTP://1.1.1.1/folder/capture%h
%t.ilo" />
<CAPTURE_AUTO_EXPORT_USERNAME
value="username" />
<CAPTURE_AUTO_EXPORT_PASSWORD
value="password" />
<SHARED_CONSOLE_ENABLE value="No" />
<SHARED_CONSOLE_PORT value="9300" />
<VSP_SOFTWARE_FLOW_CONTROL VALUE="N"/>
<!-- Firmware support information for
next tag: -->
<!-- iLO 2 - Version 1.10 and later. -->
<!-- iLO - Version 1.80 and later. -->
<!-- RILOE II - None. -->
<REMOTE_CONSOLE_ACQUIRE value="Yes" />
<!-- Firmware support information for
next 13 tags: -->
<!-- iLO 2 - None. -->
<!-- iLO - None. -->
<!-- RILOE II - All versions. -->
<!--
<HOST_KEYBOARD_ENABLED value ="YES"/>
<REMOTE_KEYBOARD_MODEL value = "US"/>