HP Integrated Lights-Out Addendum

Addendum overview
This addendum provides the updates made in HP Integrated Lights-
Out 1.92. Use this addendum in conjunction with the HP Integrated
Lights-Out User Guide for HP Integrated Lights-Out firmware 1.91
and the HP Integrated Lights-Out Management Processor Scripting
and Command Line Resource Guide.
User guide updates
iLO 1.92 implemented the following changes:
• Raw Serial Data Port option added to the Global Settings
screen.
• Additional setting parameters added to the Maximum login
flexibility option of the Schema-free setup options section.
• GNOME interface troubleshooting added to the
Troubleshooting section.
The following sections replace or supplement the corresponding
sections in the HP Integrated Lights-Out User Guide for HP Integrated
Lights-Out firmware 1.91.
Global settings
The Global Settings option enables you to view and modify iLO
security settings. With the Global Settings option, you can configure
the Remote Console time-out and iLO ports to be used for the iLO
Web Server, Remote Console, and Virtual Media. These settings are
applied globally, regardless of individual user settings.
You must have the Configure iLO Settings privilege to change these
settings. Users who do not have the Configure iLO Settings privilege
can view only assigned settings. To manage this privilege, use the
Configure Local Device Settings in the directory administration snap-
ins for directory users.
The Global Settings option enables you to define the following
functions:
• Idle Connection Timeout (minutes)
• Enable Lights-Out Functionality
• Pass-through Configuration
• Enable iLO ROM-Based Setup Utility
• Require Login for iLO RBSU
• Show iLO during POST
• Remote Console Port Configuration
• Remote Console Data Encryption
• Enable Remote Console Acquire
• SSL Encryption Strength
• Current Cipher
• Web Server Non-SSL Port
• Web Server SSL Port
• Virtual Media Port
• Remote Console Port
• Terminal Services Port
• Raw Serial Data Port
• Secure Shell (SSH) Port
• Secure Shell (SSH) Status
• Serial Command Line Interface Status
• Serial Command Line Interface Speed (bits/second)
• Minimum Password Length
• Remote Keyboard Model
To change iLO global settings:
1. Log in to iLO using an account that has the Configure iLO
Settings privilege. Click Administration.
2. Click Global Settings.
3. Change global settings by entering your selections.
4. After completing any parameter changes, click Apply to save
the changes.
For more information, see the HP Integrated Lights-Out Management
Processor Scripting and Command Line Resource Guide.
Schema-free setup options
Setup options are the same regardless of which method (browser,
HPQLOMIG, or script) you use to configure the directory.
After enabling directories and selecting the Schema-free option, you
have three login options:
• Minimum login flexibility
• Better login flexibility
• Maximum login flexibility
Minimum login flexibility
• Enter the directory server DNS name or IP address and LDAP
port. Typically, the LDAP port for an SSL connection is 636.
• Enter the distinguished name for at least one group. This group
can be a security group (for example:
"CN=Administrators,CN=Builtin,DC=HP,DC=com") or any
other group as long as the intended iLO users are members of
the group.
With a minimum configuration, you can log in to iLO using
your full distinguished name and password. You must be a
member of a valid iLO group.
Better login flexibility
In addition to the minimum settings, enter at least one directory user
context.
At login time, the login name and user context combine to make the
user's distinguished name. For instance, if the user logs in as
"JOHN.SMITH" and a user context is set up as
"CN=USERS,DC=HP,DC=COM", then the distinguished name that