HP Integrated Lights-Out Addendum

Property Access Description
oemhp_telnetenable
Read/Write Enables or disables
telnet.
oemhp_httpport
Read/Write Sets the HTTP port
value.
oemhp_sslport
Read/Write Sets the SSL port
value.
oemhp_rcport
Read/Write Sets remote console
port value.
oemhp_vmport
Read/Write Sets virtual media
port value.
oemhp_tsport
Read/Write Sets Terminal
Services port value.
oemhp_sshport
Read/Write Sets the SSH port
value.
oemhp_vsprawport (
Supported from iLO 1.92
onwards)
Read/Write Sets displays the Raw
Serial Port. value
oemhp_sshstatus
Read/Write Enables or disables
SSH. Boolean values
are accepted.
oemhp_serialclistatus
Read/Write Enables or disables
CLP session through
serial port. Boolean
values are accepted.
oemhp_serialcliauth
Read/Write Enables or disables
authorization
requirement for CLP
session through serial
port. Boolean values
are accepted.
oemhp_serialclispeed
Read/Write Sets the serial port
speed for the CLP
session. The valid
values are 9600,
19200, 38400,
57600, and
115200.
oemhp_minpwdlen
Read/Write Sets the minimum
password length
requirement.
oemhp_authfailurelogging Read/Write Sets the logging
criteria for failed
authentications.
oemhp_hotkey_t
Read/Write Sets the value for
hotkey Ctrl+T.
oemhp_hotkey_u
Read/Write Sets the value for
hotkey Ctrl+U.
oemhp_hotkey_v
Read/Write Sets the value for
hotkey Ctrl+V.
oemhp_hotkey_w
Read/Write Sets the value for
hotkey Ctrl+W.
oemhp_hotkey_x
Read/Write Sets the value for
hotkey Ctrl+X.
Property Access Description
oemhp_hotkey_y
Read/Write Sets the value for
hotkey Ctrl+Y.
oemhp_rc_aquire (not
supported in iLO v1.00)
Read/Write Enables or disables
remote console
acquire operations.
oemhp_high_perf_mouse
Read/Write Enables or disables
high performance
mouse.
oemhp_computer_lock Read/Write Enables or disables
the Remote Console
Computer Lock.
oemhp_enforce_aes Read/Write Enable or disable
enforcing AES/3DES
encryption
Examples
set /map1/ oemhp_vsprawport=3001
set /map1/config1 oemhp_enable=yes
oemhp_timeout=30
You can specify one or more properties in the command line. If you
use multiple properties on the same command line, you must
separate the properties with a space.
oemhp_computer_lock command examples:
set /map1/config1 oemhp_computer_lock =
windows
set /map1/config1 oemhp_computer_lock =
custom,l_gui,l
set /map1/config1 oemhp_computer_lock =
disabled
For a complete list of oemhp_computer_lock custom keys, see
your HP Integrated Lights-Out user guide. Any keys with a space
must have the space replaced with an underscore. For example:
set /map1/config1 oemhp_computer_lock =
custom,SYS_RQ
set /map1/config1 oemhp_computer_lock = custom,SYS_RQ
Audience assumptions
This document is for the person who installs, administers, and
troubleshoots servers and storage systems. HP assumes you are
qualified in the servicing of computer equipment and trained in
recognizing hazards in products with hazardous energy levels.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
Confidential computer software. Valid license from HP required for
possession, use or copying. Consistent with FAR 12.211 and 12.212,
Commercial Computer Software, Computer Software Documentation, and
Technical Data for Commercial Items are licensed to the U.S. Government
under vendor’s standard commercial license.
Microsoft and Windows are U.S. registered trademarks of Microsoft
Corporation. Windows Server 2003 is a U.S. trademark of Microsoft
Cor
p
oration.
Part Number 468550-001
February 2008 (First edition)