HP iLO 4 User Guide

5. Click Apply.
Using the iLO Federation Management firmware update feature
The Group Firmware Update feature enables you to update the firmware of multiple servers from
a system running the iLO web interface.
A license is required if you want to make changes on the Group Firmware Update page. For more
information about iLO licensing, see the following website: http://www.hp.com/go/ilo/licensing.
This feature allows you to do the following:
• View the number of servers with each supported firmware version. The percentage of the total
number of servers with the listed firmware version is also displayed.
• View the flash status for the grouped servers. The percentage of the total number of servers
with the listed flash status is also displayed.
• View the TPM status for the grouped servers. The percentage of the total number of servers
with the listed TPM status is also displayed.
• Update the firmware. The following firmware types are supported:
iLO◦
◦ HP ProLiant System ROM
◦ System Programmable Logic Device
◦ SL Chassis Firmware
For more information, see “Updating firmware for multiple servers” (page 191).
• View the list of servers that will be affected by a firmware update. For more information, see
“Viewing affected systems” (page 193).
Updating firmware for multiple servers
1. Download a supported type of firmware from the following website: http://www.hp.com/
support.
2. Save the firmware file to a web server.
3. Navigate to the iLO Federation→Group Firmware Update page, as shown in Figure 96 (page
192).
Using iLO Federation Management 191