HP iLO 4 User Guide

A description of each section on the Storage Information page follows.
Controllers
This section provides information about the HP Smart Array controllers.
The top-level controller status is a combination of the controller hardware status and the status of
cache modules, enclosures, and physical, logical, and spare drives associated with the controller.
If the controller hardware status is OK, and any associated hardware has a failure, the top-level
controller status changes to Major Warning or Degraded, depending on the failure type. If the
controller hardware has a Failed status, the top-level controller status is Failed.
The following information is displayed for each HP Smart Array controller:
• Controller location—Slot number or system board
• Controller status—Controller hardware status (OK or Failed)
• Controller serial number
• Controller model name and number
• Controller firmware version
• Cache module status
• Cache module serial number
• Cache module memory
Viewing iLO system information 167