HP iLO 4 Scripting and Command Line Guide
<RIB_INFO MODE="write">
<MOD_NETWORK_SETTINGS>
<ENABLE_NIC value="Yes"/>
<REG_DDNS_SERVER value="Yes"/>
<PING_GATEWAY value="No"/>
<DHCP_DOMAIN_NAME value="Yes"/>
<SPEED_AUTOSELECT value="YES"/>
<NIC_SPEED value="100"/>
<FULL_DUPLEX value="Yes"/>
<DHCP_ENABLE value="No"/>
<IP_ADDRESS value="172.20.60.152"/>
<SUBNET_MASK value="255.255.255.0"/>
<GATEWAY_IP_ADDRESS value="172.20.60.1"/>
<DNS_NAME value="demoilo"/>
<DOMAIN_NAME value="internal.com"/>
<DHCP_GATEWAY value="Yes"/>
<DHCP_DNS_SERVER value="Yes"/>
<DHCP_WINS_SERVER value="Yes"/>
<DHCP_STATIC_ROUTE value="Yes"/>
<REG_WINS_SERVER value="Yes"/>
<PRIM_DNS_SERVER value="0.0.0.0"/>
<SEC_DNS_SERVER value="0.0.0.0"/>
<TER_DNS_SERVER value="0.0.0.0"/>
<PRIM_WINS_SERVER value="0.0.0.0"/>
<SEC_WINS_SERVER value="0.0.0.0"/>
<STATIC_ROUTE_1 DEST="0.0.0.0" GATEWAY="0.0.0.0"/>
<STATIC_ROUTE_2 DEST="0.0.0.0" GATEWAY="0.0.0.0"/>
<STATIC_ROUTE_3 DEST="0.0.0.0" GATEWAY="0.0.0.0"/>
<DHCP_SNTP_SETTINGS value="Yes"/>
<SNTP_SERVER1 value="0.0.0.0"/>
<SNTP_SERVER2 value="0.0.0.0"/>
<TIMEZONE value="America/Anchorage"/>
<!-- This tag can be used on an iLO blade server to force iLO -->
<!-- to attempt to get an IP address from the signal backplane -->
<!-- in a server enclosure. The IP address must be set prior -->
<!-- with Mod_Enc_Bay_IP_Settings.xml -->
<!-- <ENCLOSURE_IP_ENABLE VALUE="Yes"/> -->
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>
Modify VLAN for the embedded LOM example:
<RIBCL version="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="WRITE" >
<MOD_NETWORK_SETTINGS>
<ENABLE_NIC value=”Yes”/>
<SHARED_NETWORK_PORT VALUE="Yes"/>
<VLAN_ENABLED VALUE="Yes" />
<VLAN_ID VALUE="1"/>
</MOD_NETWORK_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>
Modify VLAN for the FlexibleLOM example:
<RIBCL version="2.21">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="WRITE" >
<MOD_NETWORK_SETTINGS>
<ENABLE_NIC value="Yes"/>
<SHARED_NETWORK_PORT VALUE="FlexibleLOM"/>
<VLAN_ENABLED VALUE="Yes" />
90 RIBCL XML Scripting Language