HP iLO 4 Scripting and Command Line Guide

ManualsBrandsHP ManualsComputer AccessoriesHP Integrated Lights-Out 4 (iLO 4) Firmware for ProLiant Gen8 Servers

GET_NETWORK_SETTINGS return messages

A possible GET_NETWORK_SETTINGS return message is:

<GET_NETWORK_SETTINGS>

<ENABLE_NIC VALUE="Y"/>

<SHARED_NETWORK_PORT VALUE="N"/>

<VLAN_ENABLED VALUE="N"/>

<VLAN_ID VALUE="4"/>

<SPEED_AUTOSELECT VALUE="Y"/>

<NIC_SPEED VALUE="Automatic"/>

<FULL_DUPLEX VALUE="Automatic"/>

<DHCP_ENABLE VALUE="Y"/>

<DHCP_GATEWAY VALUE="Y"/>

<DHCP_DNS_SERVER VALUE="Y"/>

<DHCP_WINS_SERVER VALUE="Y"/>

<DHCP_STATIC_ROUTE VALUE="Y"/>

<DHCP_DOMAIN_NAME VALUE="N"/>

<DHCP_SNTP_SETTINGS VALUE="N"/>

<REG_WINS_SERVER VALUE="Y"/>

<REG_DDNS_SERVER VALUE="Y"/>

<PING_GATEWAY VALUE="Y"/>

<MAC_ADDRESS VALUE="9c:8e:99:30:a5:50"/>

<IP_ADDRESS VALUE="192.168.1.3"/>

<SUBNET_MASK VALUE="255.255.252.0"/>

<GATEWAY_IP_ADDRESS VALUE="192.168.1.1"/>

<DNS_NAME VALUE="ILODNSNAME"/>

<DOMAIN_NAME VALUE="hp.com"/>

<PRIM_DNS_SERVER VALUE="192.168.1.2"/>

<SEC_DNS_SERVER VALUE="0.0.0.0"/>

<TER_DNS_SERVER VALUE="0.0.0.0"/>

<PRIM_WINS_SERVER VALUE="0.0.0.0"/>

<SEC_WINS_SERVER VALUE="0.0.0.0"/>

<SNTP_SERVER1 VALUE=""/>

<SNTP_SERVER2 VALUE=""/>

<TIMEZONE VALUE="Atlantic/Reykjavik"/>

<STATIC_ROUTE_1 DEST="0.0.0.0"

MASK="0.0.0.0"

GATEWAY="0.0.0.0"/>

<STATIC_ROUTE_2 DEST="0.0.0.0"

MASK="0.0.0.0"

GATEWAY="0.0.0.0"/>

<STATIC_ROUTE_3 DEST="0.0.0.0"

MASK="0.0.0.0"

GATEWAY="0.0.0.0"/>

<IPV6_ADDRESS VALUE="fe80::9e8e:99ff:fe30:a550"

PREFIXLEN="64"

ADDR_SOURCE="SLAAC"

ADDR_STATUS="ACTIVE"/>

<IPV6_ADDRESS VALUE="fd0e:2d:ba9:221a:9e8e:99ff:fe30:a550"

PREFIXLEN="64"

ADDR_SOURCE="SLAAC"

ADDR_STATUS="ACTIVE"/>

<IPV6_STATIC_ROUTE_1

IPV6_DEST="::"

PREFIXLEN="0"

IPV6_GATEWAY="::"

ADDR_STATUS="INACTIVE"/>

<IPV6_STATIC_ROUTE_2

IPV6_DEST="::"

PREFIXLEN="0"

IPV6_GATEWAY="::"

ADDR_STATUS="INACTIVE"/>

<IPV6_STATIC_ROUTE_3

IPV6_DEST="::"

PREFIXLEN="0"

88 RIBCL XML Scripting Language