HP iLO 4 Scripting and Command Line Guide

memory_technology=64-bit Capable
cachememory1=256KB
cachememory2=2048KB
cachememory3=20480KB
The memory property displays information about the system memory.
Table 26 (page 62) shows the System memory properties. The properties are available at:
/system1/memoryn
Where n is the memory DIMM number.
Table 26 System Memory Properties
DescriptionAccessProperty
Displays the memory size.Readsize
Displays the memory speed.Readspeed
Displays the location of the memory.Readlocation
The Slot property displays information about the system slots.
Table 27 (page 62) shows the System Slot properties. The properties are available at:
/system1/slotn
Where n is the slot number.
Table 27 System Slot Properties
DescriptionAccessProperty
Displays the slot type.Readtype
Displays the slot width.Readwidth
The Firmware property displays information about the system ROM.
Table 28 (page 62) shows the System Firmware properties. The properties are available at:
/system1/firmware1
Table 28 System Firmware Properties
DescriptionAccessProperty
Displays the version of the system ROM.Readversion
Displays the date the system ROM.Readdate
For example:
• show /system1/cpu1—Displays information on one CPU.
• show /system1/memory1—Displays information on one memory slot.
• show /system1/slot1—Displays information on one slot.
• show /system1/firmware1—Displays information about system ROM.
For example:
/system1/firmware1
Targets
Properties
version=P56
date=01/05/2010
62 SMASH CLP Scripting Language