HP iLO 4 Scripting and Command Line Guide

Table 7 iLO Properties (continued)
DescriptionAccessProperty
Enables or disables CLP session through serial port. Boolean
values are accepted.
Read/Writeoemhp_serialclistatus
Enables or disables authorization requirement for CLP session
through serial port. Boolean values are accepted.
Read/Writeoemhp_serialcliauth
Sets the serial port speed for the CLP session. The valid values
are 9600, 19200, 38400, 57600, and 115200.
Read/Writeoemhp_serialclispeed
Sets the minimum password length requirement.Read/Writeoemhp_minpwdlen
Enable or disable enforcing AES/3DES encryption.Read/Writeoemhp_enforce_aes
NOTE: When enabling AES/3DES, manually close all other
GUI, XML, and CLI connections since remaining sessions may
continue to use the non-AES/3DES cipher.
Sets the logging criteria for failed authentications.Read/Writeoemhp_authfailurelogging
Enables or disables the Remote Console Computer Lock.Read/Writeoemhp_computer_lock
Verbs
• cd
• version
• exit
• show
• set
• oemhp_loadSSHkey
• oemhp_resetHotkeys
For example
set /map1/config1 oemhp_mapenable=yes oemhp_timeout=30
Specify one or more properties in the command line. If multiple properties are on the same command
line, they must be separated by a space.
For example:
set /map1/config1 oemhp_computer_lock=windows
set /map1/config1 oemhp_computer_lock=custom,l_gui,l
set /map1/config1 oemhp_computer_lock=disabled
For a complete list of oemhp_computer_lock custom keys, see the HP iLO User Guide on the
HP website at: http://www.hp.com/go/ilo/docs. Keys with a space must have the space replaced
with an underscore.
For example:
set /map1/config1 oemhp_computer_lock=custom,SYS_RQ
iLO 4 embedded health settings
iLO 4 embedded health commands enable you to display system embedded health information
for fans, temperature sensors, voltage sensors, and power supplies. Table 8 (page 46) shows the
iLO 4 Embedded Health properties.
Specific commands 45