HP iLO 4 Scripting and Command Line Guide

GET_SUPPORTED_BOOT_MODE
Use GET_SUPPORTED_BOOT_MODE to retrieve the supported boot modes. The specified user
must have a valid iLO account to execute RIBCL commands. For this command to parse correctly,
the command must appear within a SERVER_INFO command block, and SERVER_INFO MODE
must be set to read.
For example:
<RIBCL VERSION="2.0">
<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<SERVER_INFO MODE="read">
<GET_SUPPORTED_BOOT_MODE/>
</SERVER_INFO>
</LOGIN>
</RIBCL>
Possible values returned include:
• LEGACY_ONLY
• UEFI_ONLY
• LEGACY_UEFI
• UNKNOWN
GET_SUPPORTED_BOOT_MODE return messages
A possible GET_SUPPORTED_BOOT_MODE return message includes:
<?xml version="1.0"?>
<RIBCL VERSION="2.23">
<RESPONSE
STATUS="0x0000"
MESSAGE='No error'
/>
<GET_SUPPORTED_BOOT_MODE>
<SUPPORTED_BOOT_MODE VALUE="LEGACY_ONLY"/>
</GET_SUPPORTED_BOOT_MODE>
</RIBCL>
GET_SUPPORTED_BOOT_MODE runtime errors
None
GET_SERVER_NAME
Use GET_SERVER_NAME command to retrieve the host server name used by iLO.
For example:
<RIBCL version="2.0">
<LOGIN USER_LOGIN="Administrator" PASSWORD="password">
<SERVER_INFO MODE="READ" >
<GET_SERVER_NAME />
</SERVER_INFO>
</LOGIN>
</RIBCL>
The iLO firmware maintains consistency between the various places the server name is used. The
host RBSU has a two-line limitation of 14 characters each, or 28 characters of total server name
text length.
156 RIBCL XML Scripting Language