HP iLO 4 Scripting and Command Line Guide

ManualsBrandsHP ManualsComputer AccessoriesHP Integrated Lights-Out 4 (iLO 4) Firmware for ProLiant Gen8 Servers

121

122

123

124

125

126

127

128

129

130

GET_SPATIAL parameters

None

GET_SPATIAL return messages

The following response is typical of the data returned:

<DISCOVERY_RACK>Supported</DISCOVERY_RACK>

<DISCOVERY_DATA>Valid</DISCOVERY_DATA>

<TAG_VERSION>1</TAG_VERSION>

<RACK_ID>2CJ20500XC</RACK_ID>

<RACK_ID_PN>BW946A</RACK_ID_PN>

<RACK_cUUID>00000000-0000-0000-0000-000000000000</RACK_cUUID>

<RACK_DESCRIPTION>HP I Series 42U Rack Location Option</RACK_DESCRIPTION>

<RACK_UHEIGHT>42</RACK_UHEIGHT>

<DEVICE_UPOSITION>6</DEVICE_UPOSITION>

</SPATIAL>

• Discovery Rack Support <DISCOVERY_RACK>—Whether the rack supports Discovery Services

• Discovery Data Error <DISCOVERY_DATA>—Whether there was an error during discovery

• Tag Version [TAG_VERSION]—The rack tag version number

• Rack Identifier [RACK_ID]—The rack identifier

• Rack Location Discovery Product Part Number [RACK_ID_PN]—The rack part number

• Rack Location Discovery Product Description [RACK_DESCRIPTION]—The rack product name

• Rack U Height [RACK_UHEIGHT]—The rack height in U rack units. Possible values are between

1–50.

• U Position [UPOSITION]—The vertical U position value, which indicates the rack U where the

device is installed. Possible values are between 1–50.

• U Location [ULOCATION]—The side of the rack where the device is installed. Possible values

are Back, Front (default), Left, and Right.

• Server UUID [cUUID]—The Universally Unique Identifier of the server.

• <RACK_cUUID>—UUID of the rack, only present if RACK_ID AND RACK_ID_PN are used.

• Server/Enclosure/Rack U Position <DEVICE_UPOSITION>—The physical U position of the

device (server, enclosure, or rack) only present if UPOSITION is non-zero. Calculated by

subtracting the UOFFSET from UPOSITION.

Additional fields are listed depending on the server, enclosure, or chassis type.

• Server/Enclosure/Chassis U Height [UHEIGHT]—The server height in U rack units. Possible

values are between 100–5000 in increments of 100.

• Server/Enclosure/Chassis Contacts position U offset [UOFFSET]—Possible values are between

1–50.

HP ProLiant BL specific data

Bay <BAY>—Server location in the enclosure.

Enclosure UUID <ENCLOSURE_UUID>—UUID of the enclosure.

RIB_INFO 127