HP iLO 4 Scripting and Command Line Guide

<LOGIN USER_LOGIN="adminname" PASSWORD="password">
<RIB_INFO MODE="write">
<MOD_SNMP_IM_SETTINGS>
<WEB_AGENT_IP_ADDRESS value="192.168.125.120"/>
<SNMP_ADDRESS_1 value="192.168.125.121"/>
<SNMP_ADDRESS_2 value="192.168.125.122"/>
<SNMP_ADDRESS_3 value="192.168.125.123"/>
<OS_TRAPS value="Yes"/>
<SNMP_PASSTHROUGH_STATUS value="Yes"/>
<RIB_TRAPS value="No"/>
<CIM_SECURITY_MASK value="3"/>
<!-- Firmware support information for the below tags: -->
<!-- iLO 4 - All versions. -->
<!-- iLO 3 - None. -->
<!-- iLO 2 - None. -->
<SNMP_ADDRESS_1_ROCOMMUNITY VALUE="public1"/>
<SNMP_ADDRESS_1_TRAPCOMMUNITY VERSION="v1" VALUE="trapcomm1"/>
<SNMP_ADDRESS_2_ROCOMMUNITY VALUE="public2"/>
<SNMP_ADDRESS_2_TRAPCOMMUNITY VERSION="v2c" VALUE="trapcomm2"/>
<SNMP_ADDRESS_3_ROCOMMUNITY VALUE="public3"/>
<SNMP_ADDRESS_3_TRAPCOMMUNITY VERSION="1" VALUE="trapcomm3"/>
<AGENTLESS_MANAGEMENT_ENABLE value="Yes"/>
<SNMP_SYS_CONTACT VALUE="Mr. System Administrator"/>
<SNMP_SYS_LOCATION VALUE="HP Data Center, Hockley, TX"/>
<SNMP_SYSTEM_ROLE VALUE="Brief Role Description [60 characters]"/>
<SNMP_SYSTEM_ROLE_DETAIL VALUE="Extended role description [500 characters]"/>
<COLD_START_TRAP_BROADCAST value="No"/>
<!-- Firmware support information for next tag: -->
<!-- iLO 4 - 1.10 or later. -->
<!-- iLO 3 - None. -->
<!-- iLO 2 - None. -->
<!-- Acceptable values for TRAP_SOURCE_IDENTIFIER: -->
<!-- iLO Hostname, OS Hostname -->
<TRAP_SOURCE_IDENTIFIER value = "iLO Hostname"/>
<!-- Firmware support information for next tags: -->
<!-- iLO 4 - 1.20 or later. -->
<!-- iLO 3 - None. -->
<!-- iLO 2 - None. -->
<!-- Acceptable values for AUTHN_PROTOCOL: 0 or 1 -->
<!-- 0 is for MD5, 1 is for SHA -->
<!-- Acceptable values for PRIVACY_PROTOCOL: 0 or 1 -->
<!-- 0 is for DES, 1 is for AES -->
<SNMP_ACCESS_ENABLED value = "Y"/>
<SNMP_PORT value="161"/>
<SNMP_TRAP_PORT value="162"/>
<SNMP_V1_TRAPS VALUE="Yes"/>
<SNMP_V3_ENGINE_ID VALUE="0x12345678"/>
<SNMP_USER_PROFILE INDEX = "1">
<SECURITY_NAME VALUE="Security Name 1"/>
<AUTHN_PROTOCOL VALUE="0"/>
<AUTHN_PASSPHRASE VALUE="Authentication Pass Phrase 1"/>
<PRIVACY_PROTOCOL VALUE="0"/>
<PRIVACY_PASSPHRASE VALUE="Privacy Pass Phrase 1"/>
</SNMP_USER_PROFILE>
<SNMP_USER_PROFILE INDEX = "2">
<SECURITY_NAME VALUE="Security Name 2"/>
<AUTHN_PROTOCOL VALUE="0"/>
<AUTHN_PASSPHRASE VALUE="Authentication Pass Phrase 2"/>
<PRIVACY_PROTOCOL VALUE="0"/>
<PRIVACY_PASSPHRASE VALUE="Privacy Pass Phrase 20"/>
</SNMP_USER_PROFILE>
<SNMP_USER_PROFILE INDEX = "3">
<SECURITY_NAME VALUE="Security Name 3"/>
<AUTHN_PROTOCOL VALUE="0"/>
<AUTHN_PASSPHRASE VALUE="Authentication Pass Phrase 3"/>
<PRIVACY_PROTOCOL VALUE="0"/>
<PRIVACY_PASSPHRASE VALUE="Privacy Pass Phrase 3"/>
</SNMP_USER_PROFILE>
</MOD_SNMP_IM_SETTINGS>
</RIB_INFO>
</LOGIN>
</RIBCL>
RIB_INFO 103