HP iLO 4 Scripting and Command Line Guide

GET_SNMP_IM_SETTINGS return messages
A possible GET_SNMP_IM_SETTINGS return message is:
<GET_SNMP_IM_SETTINGS>
<SNMP_ACCESS VALUE="Enable"/>
<SNMP_ADDRESS_1 VALUE=""/>
<SNMP_ADDRESS_1_ROCOMMUNITY VALUE=""/>
<SNMP_ADDRESS_1_TRAPCOMMUNITY VERSION="" VALUE=""/>
<SNMP_ADDRESS_2 VALUE=""/>
<SNMP_ADDRESS_2_ROCOMMUNITY VALUE=""/>
<SNMP_ADDRESS_2_TRAPCOMMUNITY VERSION="" VALUE=""/>
<SNMP_ADDRESS_3 VALUE=""/>
<SNMP_ADDRESS_3_ROCOMMUNITY VALUE=""/>
<SNMP_ADDRESS_3_TRAPCOMMUNITY VERSION="" VALUE=""/>
<SNMP_V3_ENGINE_ID VALUE=""/>
<SNMP_PORT VALUE="161"/>
<SNMP_TRAP_PORT VALUE="162"/>
<TRAP_SOURCE_IDENTIFIER VALUE="iLO Hostname"/>
<RIB_TRAPS VALUE="Y"/>
<OS_TRAPS VALUE="Y"/>
<COLD_START_TRAP_BROADCAST VALUE="Y"/>
<SNMP_V1_TRAPS VALUE="Y"/>
<SNMP_PASSTHROUGH_STATUS VALUE="N"/>
<WEB_AGENT_IP_ADDRESS VALUE="WIN-DPOHJLI9DO8"/>
<CIM_SECURITY_MASK VALUE="3"/>
<SNMP_SYS_CONTACT VALUE=""/>
<SNMP_SYS_LOCATION VALUE=""/>
<AGENTLESS_MANAGEMENT_ENABLE VALUE="Y"/>
<SNMP_SYSTEM_ROLE VALUE=""/>
<SNMP_SYSTEM_ROLE_DETAIL VALUE=""/>
<SNMP_USER_PROFILE INDEX="1">
<SECURITY_NAME VALUE=""/>
<AUTHN_PROTOCOL VALUE="0"/>
<AUTHN_PASSPHRASE VALUE=""/>
<PRIVACY_PROTOCOL VALUE="0"/>
<PRIVACY_PASSPHRASE VALUE=""/>
</SNMP_USER_PROFILE>
<SNMP_USER_PROFILE INDEX="2">
<SECURITY_NAME VALUE=""/>
<AUTHN_PROTOCOL VALUE="0"/>
<AUTHN_PASSPHRASE VALUE=""/>
<PRIVACY_PROTOCOL VALUE="0"/>
<PRIVACY_PASSPHRASE VALUE=""/>
</SNMP_USER_PROFILE>
<SNMP_USER_PROFILE INDEX="3">
<SECURITY_NAME VALUE=""/>
<AUTHN_PROTOCOL VALUE="0"/>
<AUTHN_PASSPHRASE VALUE=""/>
<PRIVACY_PROTOCOL VALUE="0"/>
<PRIVACY_PASSPHRASE VALUE=""/>
</SNMP_USER_PROFILE>
</GET_SNMP_IM_SETTINGS>
MOD_SNMP_IM_SETTINGS
MOD_SNMP_IM_SETTINGS is used to modify SNMP and Insight Manager settings. For this
command to parse correctly, the command must appear within a RIB_INFO command block, and
RIB_INFO MODE must be set to write. The user must have the Configure iLO Settings privilege to
execute this command.
For example:
<RIBCL VERSION="2.0">
102 RIBCL XML Scripting Language