HP iLO 4 Scripting and Command Line Guide

ALERTMAIL_EMAIL_ADDRESS—Sets the destination email address for iLO email alerts. Value must
be a single email address no longer than 63 characters, and must be in standard email address
format.
ALERTMAIL_SENDER_DOMAIN—Sets the domain name to be used in the sender (From) email
address. Value is formed by using the iLO name as the hostname and the subject string as the
domain name. If this value is left blank or not specified, the iLO domain name is used (which may
not be accepted by all SMTP servers.) The maximum string length is 63 characters.
ALERTMAIL_SMTP_SERVER—Sets the IP address or DNS name of the SMTP server or the MSA.
This server cooperates with the MTA to deliver the email. The maximum string length is 63
characters. Note that the SMTP server specified must support unauthenticated SMTP connections
on port 25.
ALERTMAIL_SMTP_PORT—Sets the port that the SMTP server uses for unauthenticated SMTP
connections. The default value is 25.
IPMI_DCMI_OVER_LAN_ENABLED—Determines whether you can send industry-standard IPMI and
DCMI commands over the LAN using a client-side application. Server-side IPMI/DCMI applications
are still functional even when this setting is disabled. The valid values are Y (enabled) or N (disabled).
VSP_LOG_ENABLE—Determines whether the virtual serial port output from the server is captured.
Valid values are Y (enabled) or N (disabled). The parameter is not case sensitive.
PROPAGATE_TIME_TO_HOST—Determines whether iLO sets the system host time to match the iLO
time. Valid values are Y (enabled) or N (disabled). If enabled, the propagation time set occurs
whenever the iLO is cold-booted. The parameter is not case sensitive.
MOD_GLOBAL_SETTINGS runtime errors
Possible MOD_GLOBAL_SETTINGS error messages include:
• RIB information is open for read-only access. Write access is
required for this operation.
• User does not have correct privilege for action. CONFIG_ILO_PRIV
required.
• Unrecognized keyboard model.
• The SNMP_PORT value specified is invalid. Values supported are
between 1 and 65535.
• The SNMP_PORT value specified is invalid. This port number cannot
be used.
• The SNMP_PORT value must not be left blank.
• The SNMP_TRAP_PORT value specified is invalid. Values supported are
between 1 and 65535.
• The SNMP_TRAP_PORT value specified is invalid. This port number
cannot be used.
• The SNMP_TRAP_PORT value must not be left blank.
• Error while reading or writing SNMP data.
• iLO may not be disabled on this server. This message is sent if
ILO_FUNCT_ENABLED is set to No and the system is a blade.
100 RIBCL XML Scripting Language